Pop top Elevating roof rubber wind deflector (Reimo Spoiler) Fits Austop Westdubs Hilo Skyline popTop
The Pop top rubber wind deflector is a single piece of rubber which is discreet but smart, which is a supple item and fits above your windscreen to reduce the driving force that could drive under the roof and at the same time increases the aerodynamics.
Supplied for self-fitting.
It is very easy to fit as the rubber has M3 tape on, meaning you just need to decide where you want it located. then just simply seal with clear sealant when happy.
To obtain optimum adhesion, the bonding surfaces must be well unified, clean and dry. Prep the surface with an alcohol cleaning wipe for better adhesion.
Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure develops better adhesive contact and helps improve bond strength. Generally, this means that the tape should experience at least 15 psi (100kPa) in a roll down or platen pressure.
After application, the bond strength will increase as the adhesive flows onto the surface. At room temperature, approximately 50% of the ultimate strength will be achieved after 20 minutes, 90% after 24 hours and 100% after 72 hours. In some cases, bond strength can be increased and ultimate bond strength can be achieved more quickly by exposure of the bond to elevated temperatures (e.g. 150°F [66°C] for 1 hour).
1350mm long x 26mm high x 13mm wide