Solar Technology International
Please Note: This panel has a rear cable exit to hide the wire outside
Everything you will need to install a PV logic Flexi panel onto your caravan, motorhome or boat roof/deck Is:
- Panel
- Controler
- Bonding agent
- Wire and fuses
The PV Logic Flexi are well suited for use where a super robust, low profile and lightweight panel is needed, or the substrate to which the panel will be fixed has a slight curve. Ideal for marine buoys, boat decks, camper vans etc.
The Flexi offers the following advantages:
Self-healing top surface

Completely waterproof
Each panel is assembled to ensure complete encapsulation. This ensures the 6 layer heavy duty laminate protects the solar cell circuit from extreme conditions. The junction box is also injected with special silicon, guaranteeing no water ingress.
Cells protected from hot spots.
Where used on a camper van or boat, partial shading of a solar panel is typical. In these circumstances, heat build-up and damaging hot spots can occur leading to a significantly reduced life cycle of the panel. The larger 60w and 80w PV Logic Flexi panels have up to two shading diodes housed within the fully waterproof junction box to prevent this occurrence.
Superior design

Easy fix
The Flexi range can be bonded to flat or slight curved surfaces (3cm curve per metre) such as painted aluminium, metal, GRP and fibreglass using Simson ISR 70-03. The aluminium layer is also pre-drilled with 4.5mm holes should the panel need to be mechanically fixed as well as or instead of bonding.
Warranty
The Flexi range is setting new standards with a 5 year product and a 20 year performance manufactures warranty*.
*Cell performance warranty states that at 20 years the cell output will be no less than 80% of new performance values – i.e the cell degradation rate will be no greater than 20% in 20 years
100wp Specifications
Power (Wp) | 100watts |
Nominal Voltage (Vmp) | 18V DC |
Nominal Current (Imp) | 5.37A |
Open Circuit Voltage (Voc) | 22.3V |
Short Circuit Current (Isc) | 5.74A |
Operating Temperature | -40 to + 80 Deg C |
Max System Voltage | 750V DC |
Dimensions | 980x690x3mm (rear cable exit) |
Weight | 4.5Kg |
Approx. watt-hours/day** | 600W |
Approx. amp-hours/day** | 32.22A |
** Based on 6 hours of average daily peak sunlight hours
Contents
- 1 x 100wp solar panel (rear cable exit)
150wp Specifications
Power (Wp) | 150watts |
Nominal Voltage (Vmp) | 17.5V DC |
Nominal Current (Imp) | 8.72A |
Open Circuit Voltage (Voc) | 22.0V |
Short Circuit Current (Isc) | 9.72A |
Operating Temperature | -40 to + 85 Deg C |
Max System Voltage | 1000V DC |
Dimensions | 1515x665x3mm (rear cable exit) |
Weight | 15.2Kg |
Approx. watt-hours/day** | 900W |
Approx. amp-hours/day** | 52.32A |
** Based on 6 hours of average daily peak sunlight hours
Contents
- 1 x 150wp solar panel (rear cable exit)
Please note.
The Controler, Bonding agent, Wire and fuses are sold separately
All of our semi flexible panels will only bend from the top (has the cable and logos) to the bottom a maximum of 10% of panel length.
Bending the panel greater than this or trying to bend the panel from left to right will possibly damage the panel and also invalidate your warranty.